Published by Guset User , 2015-06-20 11: Download PDF. View in Fullscreen Report. Doors should be shut and windows up when performing these Procedures. At the end copies are to be made of the key with the sameof the calculating process the machine will ask you code. If there is no key available that is already programmed into the module, the module must be replaced. Like this book?
The new key will be registered after 60 seconds. After approximately 10 seconds, a single chime will sound and the theft alarm light will stop. Insert Master key into the ignition cylinder.
Add Duplicate Key 1. Repeated attempts to start a vehicle with anincorrect key may disable the engine control module and temporarily immobilize the vehicle. Starting at Step 9 either the original keySolution: The Hillman Group cannot be held responsible fortypographical errors, outdated or erroneous information contained in this booklet. Insert one of the two existing keys into the ignition lock and turn to the ON Run position.
The Hillman Group provides this booklet as an information source and does not assume any liability for claims, cost or damagesresulting from correct or misuse of the information provided. If everything is okay the screen will it works.
Remove the Master key and insert the new duplicate key. The operation couldtake from a few seconds to 3 minutes.YOU LAUGH YOU LOSE - YLYL #0009
Within 15 seconds of inserting the key, depress and release the accelerator pedal 6 times. Within 10 seconds, depress and release the accelerator pedal 1 time. If the key you selected and programmed through the EZClone does not start the vehicle on the first try do not try it again. The screen displays: Quick Upload Explore.
Select the correct transponder key from theapplication guide and insert into key slot.