The option for a smooth transition or a straight transition as shown in Figure 8 is primarily an option to control the transition from the start and end points of an edge to an adjacent face. Figure 6.
Center Face Set Select the center face. Parts and Features.
Using the Face Fillet option, we can choose to assign a chord width to each of these four corners. They will change in radius along their length to ensure the fillet is tangent to three adjacent faces. Figure 4. Figure 19.
Selecting the faces for a full round fillet. Leave a Reply Click here to cancel reply. You simply select the edge to be filleted and a Fillet feature is added to the selected geometry.
If three adjacent faces are present a Full Round Fillet can be used without selecting a radius. Fillet Overview. Figure 8.
A fillet usually fail is due to 2 reasons:. The Face Fillet tool does, however, have two unique and powerful settings. In case there is no existing edge and a fillet needs to be made the solution is to use a Face Fillet.
What to Learn and Why. Happy filleting! When you select a single edge, only this edge has a fillet applied.